Press ESC to close

A Creative Guide to CV Axle Driver Side Replacement: Mastering the Road

If you are a car owner you understand the importance of keeping your vehicle in top shape. One crucial component that often requires attention is the cv axle driver side especially on the driver’s side.

In this comprehensive guide we will walk, you through the process of replacing your CV axle, on the driver side providing you with valuable insights and step-by-step instructions.

Understanding CV Axles

Before we delve into the replacement process let’s take a moment to understand what a CV axle is and why it’s essential.

What is a CV Axle?

CV stands for Constant Velocity and a CV axle is a critical component of your vehicle’s drivetrain.

It is responsible for transferring power from the transmission to the wheels while allowing for the up and down movement of the suspension.

This crucial function ensures a smooth and consistent power delivery even as your wheels move over uneven surfaces.

Why Replacing the CV Axle Driver Side Matters

The cv axle driver side plays a pivotal role in your vehicle’s performance. It connects the transmission to the front wheel enabling you to steer and maintain control while driving.

Over time wear and tear can cause the cv axle driver side to fail leading to symptoms like clicking noises during turns, vibrations, or even loss of control.

Replacing the driver side CV axle is crucial for your safety and the longevity of your vehicle.

Signs of a Failing CV Axle

Identifying the symptoms of a failing CV axle or Cv axle driver side problems is essential to determine when it is time for a replacement. Look out for these signs:

Clicking Noises: If you hear clicking or popping sounds when turning it is a clear indication of a damaged CV joint.

Vibrations: Experiencing vibrations especially during acceleration, can signal a CV axle issue.

Grease on the Wheel: A torn CV boot can result in grease splattering on the inside of your wheel.

Loss of Control: A severely damaged CV axle can lead to a loss of control posing a safety hazard.

If you notice any of these symptoms it is advisable to inspect and replace the driver side CV axle promptly.

DIY CV Axle Replacement

While it is always recommended to consult a professional mechanic for cv axle driver side replacement some experienced car owners may choose to do it themselves. Here’s a basic outline of the process:

Tools and Materials You'll Need:

  • Jack and jack stands
  • Lug wrench
  • Pliers
  • Pry bar
  • New CV axle
  • CV axle nut
  • Grease
  • Torque wrench

Step-by-Step Replacement:

Safety First: Ensure your vehicle is on a level surface and engage the parking brake. Put on safety gear including gloves and eye protection.

Raise the Vehicle: Use the jack to lift the front of your car and secure it with jack stands for safety.

Remove the Wheel: Use the lug wrench to loosen the lug nuts on the wheel then remove the wheel.

Access the CV Axle: Locate the cv axle driver side which is connected to the wheel hub assembly and the transmission. It is typically protected by a CV boot.

Remove the CV Axle Nut: Use a pry bar and pliers to remove the CV axle nut.

Disconnect the CV Axle: Gently pry the CV axle from the wheel hub assembly. Be cautious not to damage other components in the process.

Install the New CV Axle: Slide the new CV axle into place ensuring it is properly seated in the wheel hub assembly and the transmission.

Tighten the CV Axle Nut: Torque the CV axle nut to the manufacturer’s specifications.

Reassemble: Put the wheel back on tighten the lug nuts and lower the vehicle.

Test Drive: Take your car for a test drive to ensure everything is functioning correctly.


In conclusion understanding the role of the cv axle driver sidee and recognizing the signs of failure is essential for any car owner. 

While CV axle replacement can be a complex task following the steps outlined in this guide can help you address the issue effectively. 

Remember that safety should always be a priority and if you are uncertain about the process consult a professional mechanic to ensure the job is done correctly. 

By maintaining your CV axles and purchasing a brand new cv axle driver side from Autobuffy for quality assurance you will not only ensure your safety and driver side axle replacement cost at a reasonable but also extend the life of your vehicle.

If You Want to Buy

Front Passenger CV Axle Shaft Assembly (CARDONE Brand), 66-1325



Part Number:


$192.41 Save $82.46

Front Passenger , Driver CV Axle Shaft Assembly (CARDONE Brand) , 66-1430



Part Number:


$150.40 Save $64.45

Front Passenger , Driver CV Axle Shaft Assembly (CARDONE Brand) , 66-1009



Part Number:


$164.40 Save $70.45

Leave a Reply

Your email address will not be published. Required fields are marked *